①. Wire-to-wire connection. People who use wire-to-wire connection can also turn it into a cable-to-cable way. Its important feature is that it is permanently connected based on two single-wire individuals or the matching wires of two cables. This kind of permanent connection is more common in the line connection of the fixed connection center line and its IDC connection.
②The board is connected to the board. This kind of board connection board can also be called a card edge, and the other is a dual military waterproof connector. The important reason why it is often called the card edge is that the final development trend has become a dual military waterproof connector. The technical characteristics and specifications of the printed PCB substrate continue to improve. When the board specifications increase, the volume of the military waterproof connector increases and the number of terminals increases. , The plugging force of the military waterproof connector is enlarged, the volume of the printed circuit of the substrate is enlarged, the relative density of the route is too large, and the final development trend becomes a dual military waterproof connector.
③T2 red copper rod drawing twisted wire connection board. This kind of T2 red copper rod drawing cable and board connection means that half of the military waterproof connector is connected to the T2 red copper rod drawing cable and connected to the printed PCB circuit board. The wire connection is the same as the above situation. The board connection is also the same, but it must be pressed. Insert or weld two waterproof connectors, many card edge waterproof connectors are still in use, and the connection terminals are properly separated from the page. Shenzhen EWEICHAT Technology Co., Ltd. is a professional manufacturer of wire-to-board waterproof connectors, board-to-board waterproof connectors, network RJ45 waterproof connectors, and other electronic waterproof connectors.