High current waterproof connector - connection mode and points for attention
Large current waterproof connector
should not feel strange when using, but how many people know the large current waterproof connector
connection plug and precautions?
Crimping is a technique for compressing and displacing metal within a specified range and connecting wires to contact pairs of electrical waterproof connectors.
This connection is similar to a cold welded connection for better mechanical strength and electrical continuity.
It can withstand harsher environmental conditions.
It is generally accepted that the correct crimping is better than tin welding, and special electrical waterproof connectors
must be used in high pressure situations.
Special clamp or automatic or semi-automatic press should be used on time.
According to the cross section of the conductor, the correct choice of the contact wire.
The reason is simple: before unplugging the electrical connector, a strong current has been applied to the electrical appliance and wire, and the current has also created a strong magnetic field near the wire, and the temperature is relatively high.
The spark is very hot, so the tip of the waterproof connector
is often damaged, charred, or broken.
At this point, the sensitivity of all electric switches are very high, the contact can be quickly pulled out, the spark time can be as short as possible.
Waterproof Connector Structure On Electrical Conductivity.waterproof connector
,waterproof connector 2 pin,waterproof rj45 connector ,connector waterproof,ip68 waterproof connector